THIẾT BỊ KIỂM TRA DỤNG CỤ BỊ GẪY CHO MÁY PHAY CNC GARANT 359400 1

Version:

XCONTROL – tactile tool contact point for tool breakage monitoring and tool length measurement. Suitable only for Siemens and Heidenhain controllers. Suitable only for Siemens and Heidenhain controllers. The machine requires a functioning USB port on the control panel. For use only in conjunction with the XCONNECT No. 359455 1. Dust-tight and watertight = IP67. Quick commissioning without hardware changeover and service engineer use. No need to interfere with the machine tool operating system!Minimisation of rejects.

Function:

IP67:

Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.

Application:

For tool breakage and process monitoring in an automated machine tool or for multi-machine operation. For tool length measurement and automatic transmission of data to a machine tool. Automatic transmission of the measured values into the machine control by GARANT XCONNECT No. 359455 1.

Supplied with:

Supplied with battery CR2.

Optional extras:

XCONNECT data memory stick No.

359455 1 Note:

The item is permanently installed on a machine and can only be used on another machine through another cycle request.

Thông tin kỹ thuật