LƯỠI CƯA SẮT HSS BAHCO 6 TPI 3802-450-32-1.60-6

Giá: 9.690.000₫

Mã sản phẩm: L51330 52 (3802-450-32-1.60-6)
Thương hiệu: BAHCO®
Công nghệ:
Xuất xứ:
Bảo hành: Default Title
Trọng lượng:

Designed for cutting almost any materialHigh speed steel hacksaw bladeSuitable for use on modern machines with skilled operators and a high degree of controlCorrect blade tension is essential for ensu...

Designed for cutting almost any material
High speed steel hacksaw blade
Suitable for use on modern machines with skilled operators and a high degree of control
Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade
If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs
Excessive tension causes high stresses in the blade and saw frame
As a general rule, harder materials call for a lower stroke rate and higher feed pressure
If the chips are burnt, feed pressure is too high
If tooth cracks appear, feed pressure is too high
Fine, powdery chips indicate that feed pressure is too low
Fine curled chips indicate the optimal feed pressure
The teeth should not be touching the workpiece when the machine is started
A useful rule of thumb is that at least three teeth should be engaged at any time
450 mm x 32 mm x 1.6 mm

Mô tả

Designed for cutting almost any material
High speed steel hacksaw blade
Suitable for use on modern machines with skilled operators and a high degree of control
Correct blade tension is essential for ensuring a straight kerf and a long useful life of the blade
If the tension is too low, the blade will bend upwards or twist, giving rise to high stresses, heavy wear of the blade and uneven, crooked kerfs
Excessive tension causes high stresses in the blade and saw frame
As a general rule, harder materials call for a lower stroke rate and higher feed pressure
If the chips are burnt, feed pressure is too high
If tooth cracks appear, feed pressure is too high
Fine, powdery chips indicate that feed pressure is too low
Fine curled chips indicate the optimal feed pressure
The teeth should not be touching the workpiece when the machine is started
A useful rule of thumb is that at least three teeth should be engaged at any time
450 mm x 32 mm x 1.6 mm